Accessories
prefabricated housing bearing
•
suitable for items such as
the roller shutter boxes of the model Inoutic
• mounting of 10 mm square shaft
• 85 x 107 mm
prefabricated housing bearing
•
suitable for items such as the roller shutter boxes of the model Kömmerling und Veka
•
for tubular motors with clippable motor head
• 100 x 100 mm
prefabricated housing bearing
• suitable for items such as the roller shutter boxes of the model SKS • for tubular motors with clippable motor head • 95 x 112 mm
universal bearings for tubular motors
•
with clippable motor head
• adjustable height
• 55 x 123 mm
end stop stopper
• for small roller shutters • length: 28 mm, grey
screw-on bearing shell
• made of plastic • for bearing HR140010
roller capsule
• for 40 mm 8-square shafts • with intake of blind gaskets or limiter disks • total length 112 mm • Ø 10 mm axial pin
roller capsule
•
for 60 mm 8-square shafts
• with intake of blind gaskets or limiter disks
• total length 135 mm
• Ø 10 mm axial pin
prefabricated housing bearing
•
suitable for items such as the roller shutter boxes of the model Kömmerling and Veka
• mounting of 10 mm square shaft
• 100 x 100 mm
security/fastening spring
• 160 mm • for 8 mm roller shutter profiles
prefabricated housing bearing
•
suitable for items such as
the roller shutter boxes of the model Inoutic •
for tubular
motors with clippable motor head
• 85 x 107 mm
end stop stopper
• for small roller shutters • length: 28 mm, white
ball bearing
• (40 x 10 mm) with collar • 10 mm inner diameter
prefabricated housing bearing
• with 35 mm radius • for usage with HR140010 ball bearings
anti-lift lock
• dichotomous
• with direct spring attachment
• mounting of 8's and 14's slats possible
• a requirement for motors with hindrance detection function
anti-lift lock
• tripartite
• with direct spring attachment
• mounting of 8's and 14's slats possible
• a requirement for motors with hindrance detection function
adapter
• for the Adapter kit HR130011 in conjunction with the series HREBH / HREFBH • absolute necessity for the hindrance detection function
adapter-Set
• 8-square-shafts 70 mm
• for Ø 45 mm Motor
• compatible with HR, ERE,
HRE, HREBH* and HREFBH*- series
* together with HR130012
motor setting cable 5-cores
• length approx. 2.8 m
• suitable for the series EREBH1060-20
universal, external radio receiver
Suitable for operating motors of shutters, awnings, blinds & other electrical loads. Hand-held radio transmitters can operate one or more radio receivers at a time. Receivers can be automatically controlled by a timer (with handheld radio transmitter HR120030A). The connected load of 400 W must not be exceeded. External radio receiver which can either be accommodated on a flush mounted box or mounted on the surface. Receiver is only compatible with transmitters HR120026A,
HR120030A, HR120032WA, HR120028A and HR120038A. Radio frequency 433.92 MHz. Suitable for all commonly utilised flush-mounted boxes.
The heicko isolation relay
Ideal for control of tubular motors with mechanical & electronic endpoints. Can be connected to one / two motors and also be operated locally through switch (HR120035A) or timer (HR120034). Isolation relay for tubular motors. 230 Volt AC. Depending on the application, individual and group circuits are possible (application examples on www.heicko.de). Suitable for all commonly utilised flush-mounted box. This is a necessity when operating multiple motors with a single switch.
modern rocker switch
• with "Up and Down" function
• directional arrows on the rocker
• suitable for all commonly utilised flush-mounted switches
• suitable for the series:
HRE, ERE, HREBH
modern rocker switch
• with "Up and Down" function
• directional arrows on the rocker
• suitable for all commonly utilised flush-mounted switches
universal bearings
•
for tubular motors with clippable motor head
• adjustable height
• 55 x 123 mm
adapter-kit
• 8-square shafts 50 mm
• for ER motors Ø 35 mm
universal bearing
•
for tubular motors
• mounting of 10 mm square shaft
• adjustable height
• 55 x 123 mm
adapter-kit
• 8-square shafts 40 mm • for ER motors Ø 45 mm
hand-held radio transmitter
To control our tubular motors with built in radio receiver as well as our external radio receivers.
Hand-held radio transmitter
With timer to control our tubular motors with built in radio receiver, as well as our external radio receivers.
• compatible with the wireless tubular motors of the series:
HRF, HREFBH and ERFN as well as the external radio
receivers HR120033A, HR120036A and key receiver HR120032A
• single as well group channel control possible
• channel and group display through LED's
• equipped with a timer
• the devices can be controlled at completely different
time levels from each other
• radio frequency 433.92 MHz
• range approx. 100 m (in open areas)
• battery, magnetic wall brackets and user manual
included with delivery
adapter-kit
• 8-square shafts 70 mm • for ER motors Ø 45 mm
5-channel design handheld radio transmitter
• compatible with the wireless tubular motors of the series:
HRF, HREFBH and ERFN as well as the external radio
receivers HR120033A, HR120036A and switch HR120032A
• single as well as group channel control possible
• channel and group display through LED's
• radio frequency 433.92 MHz
• range approx. 100 m (in open areas)
• battery, magnetic wall brackets and user manual
included with delivery
Compatibility overview handheld transmitter/ receiver/ consumer
• user manual HR120032WA
heicko timer
• there needs to be a direct power connection to the tubular
motor
• switch can be set to 'Open and Close' the tubular motor at
different times
• clock without external frame: 50 x 50 mm
• suitable for all commonly utilised flush-mounted switches
modern external 1-channel radio receiver switch
• "Up and Down" function
• integrated radio receiver
• tubular motor can be controlled wirelessly
• only compatible with transmitters HR120026A,
HR120030A, HR120032WA, HR120028A, HR120038A
• radio frequency 433.92 MHz
• user manual included
• suitable for all commonly utilised flush-mounted boxes