ER - THE RELIABLE

The motors in this series are suitable for 40's or 50's as well as 60's or 70's 8-square shafts. This is possible due to the motors being available with a diameter of 35 mm and 45 mm. The tubular motor is maintenance-free with a high life span and is equipped with a thermal overload protection system. The ease of mechanically setting up the endpoints combined with

the silent running of the motor makes this model universally applicable.

TECHNICAL INFORMATION

	ER1040-13	ER1060-10	ER1060-20	ER1060-30	ER1060-40	ER1060-50
Length without bracket	465 mm	469 mm	469 mm	539 mm	539 mm	539 mm
Motor diameter	35 mm	45 mm	45 mm	45 mm	45 mm	45 mm
Input voltage	230 V / 50 Hz	230 V / 50 Hz	230 V / 50 Hz	230 V / 50 Hz	230 V / 50 Hz	230 V / 50 Hz
Power	121 W	112 W	145 W	191 W	198 W	205 W
Rated torque	13 Nm	10 Nm	20 Nm	30 Nm	40 Nm	50 Nm
Maximum load	29 kg	23 kg	45 kg	68 kg	90 kg	113 kg
Idle speed	14 min-1	15 min-1	15 min-1	15 min-1	15 min-1	12 min-1
Current consumption	0,53 A	0,49 A	0,64 A	0,83 A	0,86 A	0,89 A
Power on duration	4 min	4 min	4 min	4 min	4 min	4 min
No. of cores	4	4	4	4	4	4
Motor protection, ISO-class	H	H	H	H	H	H
Protection type, VDE 700	IP44	IP44	IP44	IP44	IP44	IP44
Cable length	2,0 m	2,0 m	2,0 m	2,0 m	2,0 m	2,0 m
For shaft diameter	40mm, octagonal shaft	60mm, octagonal shaft	60mm, octagonal shaft	60mm, octagonal shaft	60mm, octagonal shaft	60mm, octagonal shaft